Reflex EZ-TRAC Field Guide

16. The Gravity Toolface is displayed in degrees from
zero (TDC). Press OK to continue and display the
ORIENTATION menu.
17. a) If the reading is not as desired, highlight
Enter desired Toolface and press OK. Go to
step 18 below.
b) To save the results to file, highlight
End survey and Save results and press OK.
The Zeroing value is automatically stored. Go to
step 20 below.
c) To return to the MAIN menu without saving,
highlight Cancel and press OK.
18

Reflex EZ-TRAC Specifications

General

Brand	Reflex
Model	EZ-TRAC
Category	Measuring Instruments
Language	English