Reflex EZ-TRAC Field Guide

Downhole survey
11. The BHA (Wedge/Motor) can now be run into the
hole to depth, and the survey instrument can be
prepared for the orientation survey.
Note: REFLEX™ EZ-COM will hibernate if not used
for 2 minutes. Press the ON button to continue.
12. Highlight INIT, point the IR ports at each other and
press OK.
13. Run the instrument into the BHA via wireline.
MEASURE is highlighted. Once the instrument is in
position, press OK to take the shot.
16

Reflex EZ-TRAC Specifications

General

Brand	Reflex
Model	EZ-TRAC
Category	Measuring Instruments
Language	English