Reflex EZ-TRAC Field Guide

11. a) If a good survey has been taken, highlight END
and press OK.
b) If you are not sure whether or not a good survey
has been taken, highlight REDO and press OK.
Repeat step 10.
12. Pull the instrument to surface. Undo the instrument
from the top sub to expose the IR port. Highlight
DOWNLOAD, point the IR ports at each other and
press OK. This will retrieve the following information:
Azimuth, Inclination, Magnetic Field (nT), Magnetic
Dip, Gravity, Temperature.
4

Reflex EZ-TRAC Specifications

General

Brand	Reflex
Model	EZ-TRAC
Category	Measuring Instruments
Language	English