— English Fillcontrol Auto Make-up and degassing — 06.07.2016 - Rev. B
3.5 Inadmissible operating conditions
The device is not suitable for the following applications:
• Pressure maintaining station for the facility system.
• Mobile system operation.
• Outdoor operation.
• Usage with these media:
– Mineral oils
– Flammable fluids
• Usage with these water types:
– Distilled water
– Additive water
– Glycol-containing water
Note!
It is not permitted to make any modifications to the hydraulic system or the circuitry.
3.6 Residual risks
This device has been manufactured to the current state of the art. However, some residual risk cannot be excluded.
Risk of burns on hot surfaces
Hot surfaces in heating systems can cause burns to the skin.
• Wear protective gloves.
• Please place appropriate warning signs in the vicinity of the device.
Risk of injury due to pressurised liquid
If installation, removal or maintenance work is not carried out correctly, there is a risk of burns and other injuries at the connection
points, if pressurised hot water or hot steam suddenly escapes.
• Ensure proper installation, removal or maintenance work.
• Ensure that the system is de-pressurised before performing installation, removal or maintenance work at the connection points.
Risk of injury due to heavy weight
The devices are heavy. Consequently, there is a risk of physical injury and accidents.
• Use suitable lifting equipment for transportation and installation.
To Next Page
Loading...
Need help?
General
