Fillcontrol Auto Make-up and degassing — 06.07.2016 - Rev. B English —
3.2 Personnel requirements
Only specialist personnel or specifically trained personnel may install and operate the equipment.
The electric connections and the wiring of the device must be executed by a specialist in accordance with all applicable national and
local regulations.
3.3 Personal protective equipment
When working at the system, wear the stipulated personal equipment such as hearing and eye protection, safety boots, helmet,
protective clothing, protective gloves.
See the national regulation of your country for personal protective equipment required.
3.4 Intended use
The devices must be operated only in a facility system with static pressure maintenance. The devices may be used with the following
water types:
• Non-corrosive
• Chemically non-aggressive
• Non-toxic
3.4.1 Fillcontrol Auto 2P
The device is a pressure maintaining station for heating and cooling water systems. It combines these functions:
• Adding water from a make-up system.
• System separation between facility and make-up system.
3.4.2 Fillcontrol Auto 2PS
The device is a make-up and degassing station for heating and cooling water systems. It combines these functions:
• Adding water from a make-up system.
• Degassing water from the facility system.
• System separation between facility and make-up system.
To Next Page
Loading...
Need help?
General
