Description of the device
Fillcontrol Auto Make-up and degassing — 06.07.2016 - Rev. B English —
4.5 Scope of delivery
The scope of delivery is described in the shipping document and the content is shown on the packaging.
Proceed as follows:
1. Immediately after receipt of the goods, please check the shipment for completeness and damage.
2. Please notify us immediately of any transport damage.
Basic make-up equipment:
• The pre-wired device.
• Operating manual.
4.6 Optional equipment and accessories
The following optional equipment and accessories are available for this device:
• "FQIRA+" contact water meter.
• Softening with Reflex Fillsoft.
• Expansions for Reflex Basic controllers:
– I/O modules
– Bus modules:
• Lonworks Digital
• Lonworks
• Profibus DP
• Ethernet
Note!
Separate operating instructions are supplied with accessories.
To Next Page
Loading...