Why are some nozzles not spraying on my RefPlus Opti-Mist Plus Air Conditioner?
If some nozzles on your RefPlus Air Conditioner are not spraying when the pulsing valve is open, but other nozzles are spraying properly, clean or replace the faulty nozzles.
What to do for water filter cartridge alarm on RefPlus Air Conditioner?
If the water filter cartridge alarm is triggered on your RefPlus Air Conditioner, replace the cartridge and reset the alarm, because the water particle filter is clogged.
How to fix high fluid outlet temperature on RefPlus Opti-Mist Plus Air Conditioner cooler?
Overview of the Opti-Mist+ Adiabatic Pre-Cooling System and its purpose.
Essential safety guidelines for installation, operation, and servicing to prevent hazards.
Details the system's function, components, and benefits in hot ambient conditions.
Steps for locating and securing the pumping station indoors, considering environmental protection.
Guidance on connecting piping according to industry standards, material, and pressure drop requirements.
Instructions for grounding the station and connecting system wiring according to applicable codes.
Comprehensive checks required before initial system operation for proper functionality.
Procedure for adjusting the inlet water pressure to the pump, maintaining optimal levels.
Procedure for adjusting pump outlet and heat rejection unit pressures for system performance.
Recommended monthly checks and periodic tasks for system upkeep and longevity.
Understanding system alarms and operational time counters for proactive maintenance.
Guidance on initial controller setup and making adjustments as per system requirements.
Diagnosing and resolving high fluid outlet temperatures or lack of cooling effect.
Troubleshooting abnormal fluid or outside temperature sensor readings.
Addressing problems with water distribution, nozzle performance, and filter clogging.
Resolving pump cavitation, water hammer, and system control malfunctions.
Resolving pressure alarms and temperature sensor failure alerts for system stability.
Provides physical dimensions and approximate weight of the adiabatic system unit.
Electrical wiring schematic for the 120V/1PH/60Hz system configuration.
Electrical wiring schematic for the 230V/1PH/60Hz system configuration.
Electrical wiring schematic for the 208V/3PH/60Hz system configuration.
Visual representation of the system's piping, showing component connections and flow paths.
General| Brand | RefPlus |
|---|---|
| Model | Opti-Mist Plus |
| Category | Air Conditioner |
| Language | English |
To Next Page