REFUSOL 20K-2T - Event and System Information

REFUsol 20K-2T (853P020.200)
User manual
- 50 -
interface through main interface to check details of real-time event records, Event
will be listed by the happening time, and recent events will be listed in the front.
Please refer to below picture. Long press the button and short press the button to
turn the page in standard interface, then enter into “2. Event List” interface.
2. Event List
1. Current event
2. History event
Fault information
001 ID04 06150825
(Display the event sequence number, event ID number,
and event occurrence time)
(A) “SystemInfo” Interface as below
3.SystemInfo
------Long press DOWN button
1.Inverter Type
13.Reflux Power
2.Serial Number
14.DRMs0
3.General Soft Ver
15.DRMn
4.General Hard Ver
16.MPPT Scan
5.Protocol Ver
17.Force Control
6.Safety
18.PCC Select
7.Safety SwVer
19.PV-ISO
8.Safety HardVer
20.GFCI
9.Modbus Address
21.PV Strings
10.Input Mode
22.Reactive Power
11.Remote State
23.Safety Paras
12.Reflux Enable
24.Comprotocol
The user enters the main menu by long pressing the DOWN button, short
press and turns the page to select menu contents, then long press the button to
enter "3. SystemInfo". Turning the page down can select the system information to
view.
(B) Display Time
Long press the button and short press the button to turn the page in the
standard user interface to enter into “4. Display Time”, then long press the button
to display the current system time.