10
F5100 Regency Freestanding Woodstove
INSTALLATION
MASONRY FIREPLACE
There are listed kits available to connect a stove to a masonry
fi replace. The kit is an adapter that is installed at the location
of the fi replace damper. The existing damper may have to
be removed to allow installation.
Minimum vertical of 36" before any offset.
Horizontal Maximum of 36" with 1/4" rise per foot.
NOTE: Recommend using 2-45º instead of 90º to improve
draft and performance.
Max. 36"
Horizontal
Min. 36"
Vertical
Rise
6"
[152mm]
10"
[254mm]
To Next Page
Loading...
