32 | Regency
®
P121-10/P131-10 Zero Clearance Direct Vent Gas Fireplace
|
32
installation
SAFETY SCREEN REMOVAL
1. Remove upper and lower louvers if installed.
2. Loosen 2 screws in locations shown in Diagram 1.
Diagram 1
Diagram 5
Diagram 3
Diagram 2
Diagram 4
3. Lift top bracket up and outward to remove as shown in Diagram 2.
5. Loosen the 2 screws as shown in locations shown in Diagram 4.
6. Pull the bottom bracket down and outward to remove.
4. Remove safety screen by lifting up and out.
7. To install–reverse steps.
To Next Page
Loading...
