REHM INVERTIG.PRO digital 240 DC, 240 AC/DC

Need help?

Do you have a question about the REHM INVERTIG.PRO digital 240 DC, 240 AC/DC and is the answer not in the manual?

Summary

2. Safety Notes

2.1 Safety Symbols and Warnings

Defines danger signalling words (Danger, Warning, Caution) and explains hazard symbols.

2.3 Notes and Requirements

3. Functional Description

3.1 Control Panel and Basic Operation

3.5 Welding Procedures

Details various welding procedures like TIG welding, spot welding, interval welding, and electrode welding.

3.6 Welding Parameters

Explains how to set and adjust essential welding parameters like current, time, and gas flow.

3.7 Polarity and AC;DC Settings

Covers polarity settings, AC current features like balance and frequency, and DC current options.

3.12 Program Management

3.14 System Settings

5. Putting into Operation

5.1 Safety Notes for Operation

Provides crucial safety instructions to be followed before starting work with the welding unit.

5.3 Unit Setup and Connection

6. Operation

6.1 Safety Notes

Reinforces safety precautions for operating and maintaining electrical welding units.

6.2 Electrical Risks

Details electrical hazards and necessary precautions during connection and maintenance.

6.3 Personal Safety Tips

6.6 Checks Before Starting

7. Faults

7.1 Safety Notes for Faults

Emphasizes safety procedures for handling and rectifying faults in the welding unit.

7.2 Table of Faults

Lists common faults, their causes, and suggested remedies for troubleshooting.

7.3 Error Messages

8. Maintenance Work

8.1 Safety Notes

8.2 Maintenance Table