• Order-No. 23826 Muffle pliers
• Order-No. 26805 Pressure compensation container
(Part numbers and contents are subject to change. Placing an order pls. ask for the corresponding part numbers)
2 General Notes
2.1 General Safety Instructions
• Operating instructions must be read and followed by all personnel who use this device
• Furthermore, personnel should follow all local safety rules.
• To avoid injury, appropriate protective clothing, noise absorption, protective eyewear and
other tools have to be used.
• If the machine is defective or working improperly it must be taken out of service. Call your
dealer immediately then.
• This device has been designated to be used only for its intended purpose. All other
applications must be prohibited for safety reasons.
• In case of danger turn off the machine and call your dealer or manufacturer for help.
• This device should not be left running while unattended.
• Turn all power sources off after having finished work.
• Repairs may be carried out only by experts. Persons doing repairs take over responsibility
for proper work and adherence to accident-prevention regulations (UVV).
• Use original spare parts only.
• Modifications may only be made after consultation with, and by permission of the
manufacturer. In case of modifications without permission all warranty and liability claims
will expire.
• The machine should be operated in a clean, air-conditioned room with a temperature of 18
to 35° C.
• Danger of fire: Respect the fire regulations. Leave enough space around.
• Don’t use mobiles near the machine since they may lead to disturbances.
• Don’t place anything on top of the machine.
• REITEL GmbH assumes no liability for damages to surfaces caused by equipment
supports/feet.
2.2 Special Instructions for this device
• Never store explosive, highly inflammable or burnable material in the working area.
To Next Page
Loading...