TAKING A MEASUREMENT
6. Remove the arm cuff.
7. Press the Start/Stop button to turn the monitor off.
NOTES: • The monitor will automatically turn off after
2 minutes.
• Wait 2-3 minutes before taking another
measurement. Waiting between measurements
allows the arteries to return to the condition prior
to taking a measurement. You may need to increase
the wait time depending on your individual physiological
characteristics.
5. When the measurement is complete, the arm cuff completely
deflates. Your blood pressure and pulse rate are displayed.
4. Inflation stops automatically and the measurement is started.
As the cuff deflates, decreasing numbers appear on the display and the Heartbeat
Symbol ( ) flashes.
18
To Next Page
Loading...
