Step 2:
Remove test strip from the bottle.
Immediately replace the bottle cap
tightly.
Insert test strip as shown in
diagram. A beep will sound and
the meter will turn on automatically.
Verify that all symbols appear on the
screen (see page 8).
Verify that the code number
displayed on the screen
matches the code number on
the bottle of test strips used.
If the code number does not
match, the meter may give
a false reading. If the code
does not match, use a new
strip. If the code still does not
match, use a new bottle of
test strips or call Customer
Service at 800.631.0076 (24
hours a day, 7 days a week)
To Next Page
Loading...
