ReliOn Micro - Deleting All Test Results from Memory; Initiating Memory Deletion Process

62
Step 3: After all test results have been reviewed, “End” appears.
•Pressthebuttononcetogobacktotherstresultinmemory. 
You can then scroll through results in memory again.
•Pressthebuttonfor2secondstoexitMemoryandturnoffthe 
meter. You can exit Memory in this way at any time when recalling
results.
Note:
•Ifnotestshavebeenperformed,oralltestresultshavebeen 
deleted, the current date and time appear first, then “End” appears.
•If3minuteselapsebeforeeithertheorbuttonispressed, 
a beep sounds and the test meter turns off automatically.
Deleting all test results from the memory
You can delete all test results from the memory. Remember that test
results cannot be retrieved once deleted.
Step 1: Make sure meter is off.