ReliOn Prime - Meter Set up; Setting the Time and Date

18
Meter Set Up
Before using the ReliOn® Prime Meter for the first time, you must set the time

or pm) and the Military 24-hour format (0-23). The date format can either be

Do not perform a blood glucose test until you have set the meter correctly.
Setting the Time and Date
Step 1: Turn on meter

any part of the display screen is missing (see page 11), call Customer Service.
The meter then displays the time, date, unit of measurement, and the insert
test strip symbol.
Step 2: Enter set-up mode

set-up mode.