ENGLISH
39
6. Carry out the rmware update by clicking the start button.
7. The new rmware will now be assigned to the device.
8. If the update is successful,the Power Status LEDs -T30- and MIDI Status LEDs -T31- will ash si-
multaneously. If the update failed the Status LEDs will start ashing alternatingly.
9. After having carried out the update successfully close the frimware update tool and restart Mixa-
ge via the On/Off Button -B41-.
10. After a successful update you can re-check the rmware. Please refer to item 6.1 „Firmware
Check“ under 6. „Updates & Support“.
To Next Page
Loading...