70
6.3 Wi-Fi settings
All available Wi-Fi networks will appear in Wi-Fi Settings. Switch Wi-Fi on/off in the
top right corner.
How to connect to Wi-Fi:
1. Connect to Wi-Fi by choosing the network you want to connect to, and enter a password
if required. The lock icon indicates that a password is required to connect to the Wi-Fi
network.
2. The device will say “Connecting to ---” when your device is connecting to the selected
network.
3. When you are successfully connected a white dot will appear next to the Wi-Fi name, as
well as the text “Connected to …”. The signal strength is indicated by the icon next to the
Wi-Fi name.
reMarkable will automatically reconnect to a known Wi-Fi network.
Please note that it is not possible to connect to Wi-Fi networks that require a browser
window to open.
To Next Page
Loading...
