Installation, start up and operating manual – version 5.3 Gen.10
Radio control BRICK and PAIL
• For receiver model RxDIN-CL, reconnect its cable and switch on the
machine to be operated.
• For receiver model RxDIN, close the door of the electric panel and turn
on the machine to be operated.
WARNING: DO NOT reactivate the radio control unit in the operating
area of the machine (prohibited and protected by safety barriers).
NOTE: also change the frequency on the transmitter unit before
operating the radio control unit, checking that the configuration of the
microswitches is compatible to both units.
28 REMdevice
®
- ITALY
To Next Page
Loading...
