Need help?Do you have a question about the REMdevice BRICK 09K and is the answer not in the manual?
Instructions for the correct & safe use of the equipment.
Position yourself with the transmitter unit so that you have complete and totally un-obscured vision of the machine to be operated.
Turn the key clockwise for 1/4 of a turn. Model without key: Turn the STOP button to disengage.
Press the START pushbutton or turn the key to START depending on the model.
Press the pushbuttons or move the command joysticks to carry out the function required.
The keypad will automatically switch itself off after approximately 4 minutes of inactivity.
It is possible to lock the use of the PAIL transmitter model without a key.
It is possible to lock the use of the BRICK transmitter model without a key.
The radio control unit's batteries are inside the transmitter equipment and are charged using a unique method.
Model with sealed casing for external installation at the machinery's electric panel.
LAYOUT OF COMMAND PUSHBUTTONS for the BRICK TRANSMITTER.
PAIL TRANSMITTER FULL COMMAND LAYOUT.
RECEIVER'S CONNECTION LAYOUT – COMPLETED VERSION.
With the machine to be operated turned off, plug in the receiver's multipolar cable.
Periodically clean the transmitter unit to avoid the build up of dirt.
Never use the equipment with the switching on key not properly working, blocked or broken.
SEQUENTIAL CHANGE OF FREQUENCY: 11 channels 870MHz or 60 channels on 434MHz.
For receiver model RxDIN-CL switch off the machine to be operated, disconnect the receiver's cable.
Locate the FUNCTION microswitches by opening the transmitter unit and receiver.
On the receiver unit.
The TWIN SYSTEM is comprised of two transmitter units (BRICK or PAIL) and one receiver unit.
There are two different ways to carry out transfer of control.
The RELEASE command can only be carried out by the transmitter unit currently in control of the machine.
The fixed-length telegram is composed of 64 bit.
The commands issued via the transmitter unit are processed by the microprocessor.
The linking telegram received by the reception RX module is processed by the µP A microprocessor.
With the auxiliary transmitter unit configuration the receiver unit accepts two unique serial codes.
Lists fuses for the receiver unit with their specifications.
Operating frequency, Hamming distance, command response time, range of action.
Radio frequency, antenna, contacts capacity, power supply, dimensions.
Modulation, output power, antenna, oscillator, power supply, consumption.
REMdevice guarantees the radio control unit for 1 year. Conditions apply.
Instructions for the correct & safe use of the equipment.
Position yourself with the transmitter unit so that you have complete and totally un-obscured vision of the machine to be operated.
Turn the key clockwise for 1/4 of a turn. Model without key: Turn the STOP button to disengage.
Press the START pushbutton or turn the key to START depending on the model.
Press the pushbuttons or move the command joysticks to carry out the function required.
The keypad will automatically switch itself off after approximately 4 minutes of inactivity.
It is possible to lock the use of the PAIL transmitter model without a key.
It is possible to lock the use of the BRICK transmitter model without a key.
The radio control unit's batteries are inside the transmitter equipment and are charged using a unique method.
Model with sealed casing for external installation at the machinery's electric panel.
LAYOUT OF COMMAND PUSHBUTTONS for the BRICK TRANSMITTER.
PAIL TRANSMITTER FULL COMMAND LAYOUT.
RECEIVER'S CONNECTION LAYOUT – COMPLETED VERSION.
With the machine to be operated turned off, plug in the receiver's multipolar cable.
Periodically clean the transmitter unit to avoid the build up of dirt.
Never use the equipment with the switching on key not properly working, blocked or broken.
SEQUENTIAL CHANGE OF FREQUENCY: 11 channels 870MHz or 60 channels on 434MHz.
For receiver model RxDIN-CL switch off the machine to be operated, disconnect the receiver's cable.
Locate the FUNCTION microswitches by opening the transmitter unit and receiver.
On the receiver unit.
The TWIN SYSTEM is comprised of two transmitter units (BRICK or PAIL) and one receiver unit.
There are two different ways to carry out transfer of control.
The RELEASE command can only be carried out by the transmitter unit currently in control of the machine.
The fixed-length telegram is composed of 64 bit.
The commands issued via the transmitter unit are processed by the microprocessor.
The linking telegram received by the reception RX module is processed by the µP A microprocessor.
With the auxiliary transmitter unit configuration the receiver unit accepts two unique serial codes.
Lists fuses for the receiver unit with their specifications.
Operating frequency, Hamming distance, command response time, range of action.
Radio frequency, antenna, contacts capacity, power supply, dimensions.
Modulation, output power, antenna, oscillator, power supply, consumption.
REMdevice guarantees the radio control unit for 1 year. Conditions apply.
General| Brand | REMdevice |
|---|---|
| Model | BRICK 09K |
| Category | Remote Control |
| Language | English |
To Next Page
