To Next Page
B
bennettamandaSep 2, 2025
What causes External CSU Timeout in REMEHA Quinta Ace 65?
- DDavid JonesSep 2, 2025
If there is an External CSU Timeout in your REMEHA Boiler, check the wiring and connectors. If the issue persists, replace the CSU.
What causes External CSU Timeout in REMEHA Quinta Ace 65?
If there is an External CSU Timeout in your REMEHA Boiler, check the wiring and connectors. If the issue persists, replace the CSU.
Why is my REMEHA Boiler failing to connect function groups?
If your REMEHA Boiler is failing to connect function groups, it could be because the function group was not found. Try carrying out an auto-detect. If the issue persists, try restarting the boiler or replacing the CU-GH.
What does Waiting For Configuration Number mean in REMEHA Boiler?
If your REMEHA Boiler is Waiting For Configuration Number, it may be due to a configuration error or an unknown configuration number. Reset CN1 and CN2.
What does Configuration Error mean in REMEHA Boiler?
If your REMEHA Boiler is showing a Configuration Error, it may be due to a configuration error or an unknown configuration number. Reset CN1 and CN2.
What does Full Can Device Administration mean in REMEHA Boiler?
If there is a Full Can Device Administration issue on your REMEHA Boiler, it might be because the SCB was not found. Carry out an auto-detect.
What to do if the driver for the gas valve is broken in REMEHA Boiler?
General| Model | Quinta Ace 65 |
|---|---|
| Category | Condensing Boiler |
| Fuel Type | Natural Gas / LPG |
| Output Power | 65 kW |
| Max Heat Output (80/60°C) | 65 kW |
| Installation | Wall-mounted |
| Modulation Range | 1:5 |
| Max Working Pressure | 3 bar |
| Max Flow Temperature | 85°C |
| Electrical Connection | 230V, 50Hz |
| Protection Rating | IPX4D |
| Type | Condensing |
