What to do if Flow temperature sensor is removed or below range in REMEHA Boiler?
If the flow temperature sensor on your REMEHA Boiler is either removed or measuring a temperature below range, check the wiring and connectors.
What to do if Flow temperature sensor is shorted or above range in REMEHA Quinta Ace Boiler?
If the flow temperature sensor on your REMEHA Boiler is either shorted or measuring a temperature above range, check the wiring and connectors.
What to do if Return temperature sensor is removed or below range in REMEHA Boiler?
If the return temperature sensor on your REMEHA Boiler is either removed or measuring a temperature below range, check the wiring and connectors.
What to do if Return temperature sensor is shorted or above range in REMEHA Boiler?
If the return temperature sensor on your REMEHA Boiler is either shorted or measuring a temperature above range, check the wiring and connectors.
What to do if Water Pressure Warning is active on REMEHA Quinta Ace?
If the water pressure warning is active on your REMEHA Boiler, it means the water pressure is too low. You should check the water pressure to resolve this issue.
Why heat exchanger temperature exceeded maximum operating value in REMEHA Quinta Ace?
If the heat exchanger temperature on your REMEHA Boiler has exceeded the maximum operating value, check the circulation (direction, pump, valves). Also, check the water pressure, ensure the sensors are operating correctly and properly fitted, and verify the cleanliness of the heat exchanger.
What to do if the flow temperature has exceeded the maximum operating value in REMEHA Quinta Ace?
If the flow temperature on your REMEHA Boiler has exceeded the maximum operating value, it could be due to a bad connection, an incorrectly fitted or faulty sensor or no flow. Check the wiring and connectors, the circulation (direction, pump, valves), the water pressure and the cleanliness of the heat exchanger.
Why is the measured ionization current below limit in REMEHA Quinta Ace?
If the measured ionization current is below the limit in your REMEHA Boiler, and there's no flame during operation, purge the gas supply to remove air. Also, check whether the gas tap is properly open, check the gas supply pressure, the operation and setting of the gas valve unit, ensure that the air inlet and flue gas discharge flues are not blocked, and verify that there is no recirculation of flue gases.
What to do for 5x Error of unintended Flame Loss occurrence in REMEHA Quinta Ace Boiler?
If your REMEHA Boiler shows a 5x error of unintended flame loss occurrence, purge the gas supply to remove air. Also check whether the gas tap is properly open, check the gas supply pressure, check the operation and setting of the gas valve unit, ensure that the air inlet and flue gas discharge flues are not blocked, and verify that there is no recirculation of flue gases.
How to fix Flue gas temperature exceeding maximum operating value in REMEHA Quinta Ace?
If the flue gas temperature on your REMEHA Boiler has exceeded the maximum operating value, replace the sensor. Also, check the flue gas outlet system and the heat exchanger to ensure that the flue gas side is not clogged.
General| Model | Quinta Ace |
|---|---|
| Category | Boiler |
| Installation | Wall-mounted |
| Boiler Type | Condensing |
| Warranty | 2 years |
| Fuel Type | Natural Gas |
| NOx Emissions | Class 5 |
Provides essential safety guidelines for installers and end-users.
Details specific safety measures and additional guidelines for safe use.
Presents key technical data, including output, input, and gas/flue gas information.
Explains how the boiler functions, including gas/air regulation and combustion.
Specifies the necessary regulations and qualifications for installation.
Guides on making the necessary hydraulic connections for the system.
Details the procedure for connecting the gas supply to the boiler.
Explains various types of air supply and flue gas connection classifications.
Describes the safe and correct electrical connections for the boiler.
Provides a comprehensive checklist for pre-commissioning checks.
Outlines the step-by-step procedure for commissioning the boiler.
Details how to adjust gas types and check combustion parameters.
Lists and explains parameters adjustable by the user.
Lists and explains parameters adjustable by the installer.
Details routine inspection and maintenance tasks for the boiler.
Lists and explains various error codes displayed by the boiler.
To Next Page