Remington iLIGHT Elite IPL7000 - Guidance and Manufacturers Declaration

31
Guidance and Manufacturer’s Declaration
Labeling
Electromagnetic Emissions
The iLIGHT
®
device is intended for use
in the electromagnetic environment
specied. The customer or device user
should assure that it is used in such
an environment.
EMISSIONS TEST COMPLIANCE ELECTROMAGNETIC ENVIRONMENT — GUIDANCE
RF emissions
CISPR 11
Group 1 The iLIGHT
®
device uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B The iLIGHT
®
device is suitable for use in all establishments, including
domestic establishments and those directly connected to the public
low voltage power supply network that supplies buildings used for
domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage uctuations/
icker emissions
IEC 61000-3-3
Complies
RF emissions
CISPR 14-1
Complies The iLIGHT
®
device is not suitable for interconnection with other
equipment.