Setting the holiday program
Press the "Mode" key (B) until the "Holiday mode" symbol (3) appears.
Example: Start the program on the 27th September
.
Fig. 36: Holiday mode
A: Press the "Clock" key (C) in order to save your
entry
.
B: Wait 5 seconds and your settings will be imple-
mented.
C: Press the "On/Off" key (1) in order to return
directly to the main display.
NOTES
1. Switch the unit of
f before going on holiday and set the date upon which the heat pump should
start up again. It is not necessary to switch it on. The unit will switch itself on automatically on
the set date.
2. When the unit switches on, the symbols continue to be displayed in the main display
, e.g.
"OFF". The display information is deleted at 0:00 hrs.
3. The heat pump is started at 0:00 hrs.
41
To Next Page
Loading...
Need help?
General
