REMKO RBW PV Series User Manual

Parameter configuration
Main menu
Main display: In order to access the parameter level, proceed as follows:
10 sec.
or
A
B
or
or
or
Fig. 37: Configuration of the parameters - expert level
A: The steps for changing other parameter values
are the same as with the parameter "d02".
B: Confirm the "Mode" key (B) in order to save your
setting and press the "On/Of
f" key to return to
the main menu.
NOTES
1. If, after changing the values, the "On/Of
f" key is pressed whilst the parameter flashes, the
values will not be saved and it will jump to the top parameter.
2. After saving the settings via the "Mode" key it is possible to return to the main menu by
pressing the "On/Of
f" key.
3. After 20 seconds the set values will be saved and the display will show the main screen.
REMKO RBW PV series
42

REMKO RBW PV Series Specifications

General

Brand	REMKO
Model	RBW PV Series
Category	Heat Pump
Language	English