REMKO RBW PV Series User Manual

Reset to factory condition
Main menu
Main display: T
o start the reset function, proceed as follows:
10 sec.
2 sec.
10 sec.
W
Fig. 38: Reset to factory condition
W: Then wait until the start screen appears
After the number combination "888" appears, the controller is reset with the exception of the stored time pro-
gram to factory settings. After the reset, the controller is restarted in the previously set operating mode.
43

REMKO RBW PV Series Specifications

General

Brand	REMKO
Model	RBW PV Series
Category	Heat Pump
Language	English