5. Dirt can also be removed by carefully
cleaning with lukewarm water and mild
cleaning agents (
Fig. 39). The dirty side
should be face down.
6. If water is used, let the filter dry out properly
in the air before fitting it back into the unit.
7. Carefully insert the filter
. Ensure that it
locates correctly.
8. Close the front side as described above in
reverse order
.
9. Switch the power supply back on.
10. Switch the unit back on.
Fig. 37: Folding the grill upwards
Fig. 38: Cleaning with a vacuum cleaner
Fig. 39: Cleaning with lukewarm water
Cleaning the condensate pump (accessories)
An optional integrated or separate condensate
pump may be in the indoor unit, which pumps out
any accumulated condensate into higher posi-
tioned drains.
Observe the care and maintenance instructions in
the separate operating manual.
REMKO WLT EC series
50