Remote Solution NAP Series - Activation; Configuration

Activation / Configuration
By default, the station is setup for automatic DHCP connection.1)
The Access Station NAP is ready and operational
as soon as the boot up is done, the connectivity established.
This should take less than 1 minutes in normal temperature conditions.
3)
To activate the device, the GNSS coordinates must be manually
inputted by the user via the Android App or Web UI.
Please refer to “NAP Settings” for more information.
4)
Check the Support Section of this guide
if you need to reconfigure the Ethernet.
5)
Check the Support Section of this guide
if you need to reconfigure the Ethernet or LTE network settings.
2)
09