02
Information
General
NAP is a gateway equipment that comes in three versions.
These are categorized by the capability of internet connection.
NAP3 connects the Sigfox cloud platform to an wired Ethernet
cable or through Wi-Fi connection.
NAP5 features a built-in Cellular module which supports LTE Cat
M1 as a default capability. (LTE Cat1 is a customized option for
user). NAP5 doesn’t support a wired network or Wi-Fi. (only LTE
support)
NAP7 connects to Sigfox Cloud via an existing LAN infrastructure
(Ethernet or Wi-Fi) or cellular network.
It features the ability to automatically switch networks if en-
countering an issue on the network, as well as checking net-
work backhaul to support seamless data service.
Improve Sigfox Device Coverage Indoor
With the multiple backhaul capability, NAP can be installed at
customer premises where Ethernet, Wi-Fi and LTE are available.
This can be installed for indoor or rural outdoor with IP61 enclo-
sure such as attics, underground, warehouses, buildings, shops,
farms, offices and etc.
It can be installed in a Sigfox radio-shaded area that is out of
signal range of existing access stations to further increase cov-
erage.
To Next Page
Loading...