NU739_4_G1-FRA.qxd 19/01/06 11:59 Page 1.77
NU739-4 - B73
C:\Documentum\Checkout\NU739_4_T1-ENG.win 20/3/2006 13:31
-page85
1.77
WINDSCREEN WASH/WIPE
Windscreen wiper with
automatic wiper function
With the ignition on, move stalk 1
from A to D.
- A off
- B automatic wiper function
When this position is selected,
the system detects water on the
windscreen and triggers wiping
at a suitable wiping speed.
Thecentreringofstalk1 allows
the sensitivity to be varied from
– to
■:
– represents minimum sensi-
tivity
■ represents maximum sensi-
tivity.
- C normal wiping speed.
- D fast wiping speed.
Depending on the vehicle, each
time the ignition is switched off,
you must come back to park
position A to return to automatic
wiper position.
Automatic selection of wiping
speed
When driving with a wiping speed
selected, the wiping speed changes
to a lower speed if the vehicle
should stop:
- from fast wipe speed the speed
will change to continuous slow
wipe.
- from continuous slow wipe speed
the speed will change to
intermittent wipe.
As soon as the vehicle moves off,
wiping will return to the speed
originally selected.
When the vehicle is stationary,any
movement on the stalk 1 takes
priority and cancels the automatic
setting.
Note: if for any reason the wipers
cannot move (e.g. stuck to
windscreen by ice), the system will
automatically cut off the power
supply to the wipers.
To Next Page
Loading...
