NU739_4_G1-FRA.qxd 19/01/06 11:59 Page 1.79
NU739-4 - B73
C:\Documentum\Checkout\NU739_4_T1-ENG.win 20/3/2006 13:31
-page87
1.79
REAR SCREEN WASH/WIPE
Rear screen wiper with
timer
With the ignition switched on, turn
the end of stalk 1 to align mark 2
opposite the symbol.
Rear screen wash/wipe
With the ignition switched
on, turn the end of stalk 1 to align
mark 2 opposite the symbol.
When the stalk is released, it returns
to the rear wipe position.
Special note
If the windscreen wipers are
operational when you select reverse
gear, the rear screen is wiped
intermittently.
Before using the rear wiper, check
that no transported object obstructs
the travel of the blade.
In frosty weather, make sure the
wiper blades are not stuck by ice
(risk of motor overheating).
Keep an eye on the condition of the
blades. Replace the wiper blades as
soon as they begin to lose efficiency
(approximately once a year).
To Next Page
Loading...
