Renesas EK-RA4E2 - Figure 5. Selecting the Serial Port on Tera Term; Figure 6. Select 115200 on the Speed Pulldown

To Next Page

To Previous Page

Renesas RA Family EK-RA4E2 – Quick Start Guide

R20QS0037EG0200 Rev.2.00 Page 11 of 26

Feb.21.23

5. Open Tera Term, select Serial and COMxx: USB Serial Device (COMxx) and click OK.

Figure 5. Selecting the Serial Port on Tera Term

6. Using the Setup menu pull-down, select Serial port… and ensure that the speed is set to 115200, as

shown below.

Figure 6. Select 115200 on the Speed Pulldown

Main Page

Table of Contents5
Renesas RA Family7
Ek-Ra4E27
Introduction7
Assumptions and Advisory Notes7
Kit Contents7
Figure 1. EK-RA4E2 Kit Contents7
Overview of the Quick Start Example Project8
Quick Start Example Project Flow8
Figure 2. Quick Start Example Project Flow8
Running the Quick Start Example Project9
Connecting and Powering up the EK-RA4E2 Board9
Figure 3. Connecting the EK-RA4E2 Board to the Host PC Via USB Full Speed Port9
Figure 4. USB Serial Device in Windows Device Manager10
Figure 5. Selecting the Serial Port on Tera Term11
Figure 6. Select 115200 on the Speed Pulldown11
Figure 7. Welcome and Main Menu12
Figure 8. Kit Information12
Customizing the Quick Start Example Project13
Downloading and Installing Software and Development Tools13
Figure 9. Next Steps13
Downloading and Importing the Quick Start Example Project14
Figure 10. Creating a New Workspace14
Figure 11. Launching the Workspace14
Figure 12. Importing the Project15
Figure 13. Importing Existing Projects into the Workspace16
Figure 14. Clicking Next to Import Existing Projects into the Workspace16
Figure 15. Selecting the Root Directory17
Figure 16. Finishing Importing the Quick Start Example Project18
Modifying, Generating, and Building the Quick Start Example Project19
Figure 17. Opening the Configurator19
Figure 18. Open Perspective19
Figure 19. Modifying the Configuration Settings20
Figure 20. Saving the Configuration Changes21
Figure 21. Building the Project21
Figure 22. Successful Build Output21
Setting up Debug Connection between the EK-RA4E2 Board and Host PC22
Figure 23. Connecting the EK-RA4E2 Board to the Host PC Via USB Debug Port22
Downloading and Running the Modified Quick Start Example Project23
Figure 24. Selecting the Debug Option23
Figure 25. Selecting the Debug Image23
Firewall Dialogue24
Figure 26. Opening the Debug Perspective24
Figure 27. Executing the Project24
Next Steps25
Website and Support25
Revision History26

Renesas EK-RA4E2 - Figure 5. Selecting the Serial Port on Tera Term; Figure 6. Select 115200 on the Speed Pulldown

Table of Contents

Other manuals for Renesas EK-RA4E2

Related product manuals