Renesas EK-RA4E2 - Figure 20. Saving the Configuration Changes; Figure 21. Building the Project; Figure 22. Successful Build Output

Renesas RA Family EK-RA4E2 – Quick Start Guide
R20QS0037EG0200 Rev.2.00 Page 21 of 26
Feb.21.23
3. After the desired modifications are made, click Generate Project. A dialog box may appear with an
option of saving the configuration changes. Click Proceed.
Figure 20. Saving the Configuration Changes
4. Modify the source files in the /src folder as needed and save the changes.
5. Build the project by clicking the build icon.
Figure 21. Building the Project
6. A successful build produces an output as follows.
Figure 22. Successful Build Output