Renesas EK-RA4E2 - Downloading and Running the Modified Quick Start Example Project; Figure 24. Selecting the Debug Option; Figure 25. Selecting the Debug Image

Renesas RA Family EK-RA4E2 – Quick Start Guide
R20QS0037EG0200 Rev.2.00 Page 23 of 26
Feb.21.23
5.5 Downloading and Running the Modified Quick Start Example Project
1. In e
2
studio, click the drop-down menu for the debug icon, select Debug Configurations option.
Figure 24. Selecting the Debug Option
2. In the dialogue, on the left-hand pane, expand the Renesas GDB Hardware Debugger and select the
built image to debug. In this case, the quickstart_ek_ra4e2_ep Debug_Flat.
Figure 25. Selecting the Debug Image