Renesas EK-RA6M3 User Manual

Renesas RA Family EK-RA2A1 – Quick Start Guide
R20QS0010EU0100 Rev.1.00 Page 6 of 20
Sep.17.19
1. Introduction
This Quick Start Guide (QSG) provides:
• An overview of the Quick Start example project that the EK-RA2A1 board comes pre-programmed with.
• Instructions for running the Quick Start example project.
• Instructions for importing, modifying, and building the Quick Start example project using Flexible Software
Package (FSP) and e
2
studio Integrated Development Environment (IDE).
1.1 Assumptions and Advisory Notes
1. Tool experience: It is assumed that the user has prior experience working with IDEs such as e
2
studio
and terminal emulation programs such as Tera Term.
2. Subject knowledge: It is assumed that the user has basic knowledge about microcontrollers, embedded
systems, and FSP to modify the example project described in this document.
3. The screen shots provided throughout this document are for reference. The actual screen content may
differ depending on the version of software and development tools used.
2. Kit Contents
The following components are included in the kit:
1. EK-RA2A1 board
2. Micro USB device cable
Figure 1. EK-RA2A1 Kit Contents
1
2

Renesas EK-RA6M3 Specifications

General

Brand	Renesas
Model	EK-RA6M3
Category	Computer Hardware
Language	English