EasyManua.ls Logo

Renfert MT3 - G. Technical data

Renfert MT3
12 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 10 -
EN
F. Disposal instructions

the unit.
F.1 Disposal instructions for countries in the EU
To conserve and protect the environment, prevent environmental pollution and improve the recycling of raw materials,
the European Commission adopted a directive that requires the manufacturer to accept the return of electrical and
electronic units for proper disposal or recycling.
Within the European Union units with this symbol should not therefore be disposed of in unsorted domestic
waste.
For more information regarding proper disposal please apply at your local authorities.
G. Technical data
MT3 MT3 pro
Mains voltage
220-240 V, 50/60 Hz 230 V, 50 Hz
100-120 V, 50/60 Hz 120 V, 60 Hz
Power consumption
1.300 W / 1,74 hp (220-240 V) 1.650 W / 2,21 hp (230 V)
1.325 W / 1,78 hp (120 V) 1.500 W / 2,01 hp (120 V)
Speed
2.880 1/min. (50 Hz)
3.450 1/min. (60 Hz)
Water consumption, max. 7 l/min.
Necessary water pressure min. 1 bar / max 5 bar
Connection piece diameters for drain hose 36 mm
Dimensions (WxHxD)
305 x 330 x 410 mm
12,0 x 13,0 x 16,1 inch
Trimmer disc dimensions
Ø 234 mm
Ø 9,2 inch
Weight (without trimmer disc) 13,2 kg 14,5 kg
LpA *) (idel) 74 dB(A)
 
Maesurement of motor sound only. Depending on workpiece and method of operation the grinding noise can be louder.
H. Disclaimer

= the product is used for purposes other than those stated in the operating instructions
= %$$"$Q$"%$%$$$$%$
= %$%$$"$$+%
used
= there is continued use of the product despite obvious safety defects or damage
= the product has been subjected to mechanical knocks or has been dropped.
I. Guarantee
Renfert gives a 3-year guarantee on all parts of the MT3 / MT3pro provided that the product is used in accordance
with the operating instructions.
The original sales invoice of the specialist depot is required for a claim under guarantee.
Parts subject to natural wear and tear and also consumables (trimming discs etc. ...) are not covered by the guarantee.
The guarantee is rendered void in the case of incorrect use, non-adherence to the operating, cleaning, servicing or


Successful claims under guarantee do not extend the guarantee period.
Subject to alteration
EN