Renfert POWER User Manual (English)

Other manuals for Renfert POWER

Questions and Answers:

Hayden MilesJul 28, 2025

What to do if my Renfert Water Dispenser shows a negative filter status?

M
Michaela Macdonald MDJul 29, 2025
If a negative value appears when checking the "Filter status" on your Renfert Water Dispenser, it likely means the filter capacity wasn't reset the last time the filter was changed. To resolve this, reset the filter capacity. Note that continuing to use the filter cartridge until the replacement display appears may exceed its intended lifespan. If needed, replace the filter cartridge before the replacement display appears.

ynewtonAug 11, 2025

Why is the POWER steamer not filled in my Renfert Water Dispenser?

J
Jeremy HansonAug 11, 2025
If the POWER steamer on your Renfert Water Dispenser isn't filling, there are a couple of potential causes: * The water connections might be assembled against the direction of flow on the filter head. Check the assembly, ensuring it matches the direction indicated on both the filter head and the sensor unit. * The water supply could be turned off. Make sure to turn on the water supply.

Brand

Renfert

Model

POWER