M8 touch-trigger probes
This range of probes utilises the M8 bush for mounting to the head. These can be fitted directly onto the PH10T PLUS head, but when used
with the PH10M PLUS or PH10MQ PLUS heads, one of the autojoint to M8 bush extension bars of the PAA1 adaptor must be used.
Probe Diameter Application User's guide
TP2-5W 13 mm Universal probe for DCC and
manual CMMs.
H-1000-5021
TP6* 25 mm Universal probe for DCC and
manual CMMs.
H-1000-5008
TP20 13.2 mm Universal probe for DCC and
manual CMMs with module
changing.
H-1000-5021
TP200 13.5 mm Universal probe with strain
gauge for DCC CMM - 100 mm
max stylus length.
H-1000-5014
* An autojoint version (TP6A) is also available
Multiwire (autojoint) probes
This range of probes is compatible with the PH10M PLUS and PH10MQ PLUS heads only and utilise the Renishaw multiwired autojoint
connection to the head.
Probe Diameter Application Weight User's guide
SP25M 25 mm High speed scanning
probe.
65 g (body)
35 g (SM25-1)
40 g (SM25-2)
49 g (SM25-3)
71 g (SM25-4)
45 g (SM25-5)
40 g (TM25-20)
H-1000-5104
TP7M 25 mm Universal probe with
strain gauge for DCC
CMMs.
85 g (without stylus) H-1000-2010
SP600M* 50 mm Analogue contact
scanning probe.
216 g (without stylus) H-1000-5175
Probes in this range require comprehensive integration with your CMM.
* When using PH10MQ PLUS with SP600M, a PEM25 extension bar is required to achieve A = 97.5° or A = 105° in all B‐axis positions.
To Next Page
Loading...
Need help?
General
