Renishaw PH10 PLUS Series - HCU2 Hand Control Unit

HCU2 hand control unit
The HCU2 hand control unit is an optional control which enables the PH10 PLUS system to be used in manual mode or in a teach cycle. A LCD
dot matrix display provides information on system status.
See the HCU2 user's guide (part number H-1000-5361) for further information on the features and operation of the unit, or contact your
Renishaw representative for advice.
PH10 PLUS installation and user's guide
www.renishaw.com
Issued 03 2020
24