Why does Renogy 2000W have idle draw?
When a Renogy Inverter is switched on, its internal circuitry is activated. Even without a load on the AC side, a small amount of current is drawn to keep the circuitry ready. To avoid this idle draw, it's recommended to turn off the inverter when it's not in use.
Identifies the various components and connection points of the inverter unit.
Provides the physical dimensions of the inverter unit.
Lists and describes the components included with the inverter charger.
Details the battery temperature sensor and its function in adjusting charging voltage.
Recommends suitable locations for installing the inverter to ensure optimal performance and safety.
Guidance on determining the appropriate battery bank size for the inverter system.
Explains the importance and methods of properly grounding the inverter for safety.
Instructions for connecting the DC power source to the inverter.
Instructions for connecting the AC power source and loads to the inverter.
Explains the automatic neutral-to-ground bond switching feature for safety.
Details the automatic transfer relay switch that manages AC input power.
Explains the auto generator start feature for automatic generator operation.
Describes the function and use of the control panel keys for operation.
Explains how the cooling fans operate based on various conditions.
Details the main menu navigation and display options using the control panel.
Shows how input AC voltage and output AC voltage are displayed.
Displays battery DC voltage and AC load voltage.
Shows battery DC voltage and output power in Watts.
Displays battery DC voltage and output load percentage.
Shows battery DC voltage and output frequency.
Displays input AC frequency and output AC voltage.
Shows input AC voltage and input current.
Displays inverter temperature and output AC voltage.
Indicates the current version number of the inverter firmware.
Guides on setting the battery type using pre-set options for optimal charging.
Allows custom configuration of battery type and charging parameters.
Determines if the custom battery is Lithium or non-lithium.
Sets the maximum charging voltage for custom lithium batteries.
Sets the voltage for resuming charging after battery discharge.
Sets the bulk charging voltage for custom non-lithium batteries.
Sets the floating charging voltage for custom batteries.
Explains the meaning of the AC/INV, CHG, and FAULT LED indicators.
Describes the function and use of the control panel keys for operation.
Details the icons and their meanings on the inverter's LCD display.
Indicates the AC input status and related voltage, frequency, and current readings.
Shows program selection, warning, and fault codes on the LCD display.
Displays output voltage, frequency, load percentage, VA, and Watt.
Shows battery level, charging status, and voltage modes in AC and battery modes.
Indicates overload status and load percentage based on battery voltage.
Explains icons for shore power, utility power, charger circuit, and inverter circuit.
Indicates when the unit alarm is disabled.
Describes the function and use of the control panel keys for programming.
Allows exiting the parameter setting mode and returning to the main menu.
Configures the power source priority between utility and battery.
Sets the acceptable AC input voltage range for utility or generator operation.
Enables or disables the power saving mode to conserve battery power.
Controls whether the inverter automatically restarts after a temperature fault.
Sets the output frequency for the inverter's AC power.
Sets the maximum utility charging current for the battery bank.
Sets the voltage point to disconnect loads when the battery is low.
Sets the voltage for resuming operation after over-voltage conditions.
Configures alarm settings for faults and button presses.
Configures the inverter display to return to default or stay on the last screen.
Controls whether the LCD screen turns off after inactivity.
Disables audible feedback for a quieter operation.
Enables or disables the recording of fault codes.
Sets the bulk charging voltage for custom batteries.
Sets the floating charging voltage for custom batteries.
Sets the minimum DC voltage before the inverter cuts off operation.
Sets the AC input frequency range for utility or generator.
Allows custom selection of battery type for charging parameters.
Sets the high voltage trip for dry contacts to control generator start/stop.
Sets the low voltage trip for dry contacts to control generator start/stop.
Enables or disables dry contact control for the auto generator function.
Sets a programmable battery voltage alarm to warn of discharge.
Customizes the AC output voltage for specific device requirements.
Describes the initial constant current charging phase.
Details the absorption charge phase with constant voltage.
Explains the trickle charging phase to maintain battery charge.
Describes the high-voltage charging stage for specific battery types.
Details warning events and their corresponding codes and icons.
Lists fault events, their codes, and associated error displays.
Lists key performance parameters for the inverter function.
Lists key performance parameters for the battery charger function.
Details specifications related to the automatic transfer switch functionality.
Lists general operating and environmental specifications for the unit.
Specifications for the wired remote control accessory.
Identifies the various components and connection points of the inverter unit.
Provides the physical dimensions of the inverter unit.
Lists and describes the components included with the inverter charger.
Details the battery temperature sensor and its function in adjusting charging voltage.
Recommends suitable locations for installing the inverter to ensure optimal performance and safety.
Guidance on determining the appropriate battery bank size for the inverter system.
Explains the importance and methods of properly grounding the inverter for safety.
Instructions for connecting the DC power source to the inverter.
Instructions for connecting the AC power source and loads to the inverter.
Explains the automatic neutral-to-ground bond switching feature for safety.
Details the automatic transfer relay switch that manages AC input power.
Explains the auto generator start feature for automatic generator operation.
Describes the function and use of the control panel keys for operation.
Explains how the cooling fans operate based on various conditions.
Details the main menu navigation and display options using the control panel.
Shows how input AC voltage and output AC voltage are displayed.
Displays battery DC voltage and AC load voltage.
Shows battery DC voltage and output power in Watts.
Displays battery DC voltage and output load percentage.
Shows battery DC voltage and output frequency.
Displays input AC frequency and output AC voltage.
Shows input AC voltage and input current.
Displays inverter temperature and output AC voltage.
Indicates the current version number of the inverter firmware.
Guides on setting the battery type using pre-set options for optimal charging.
Allows custom configuration of battery type and charging parameters.
Determines if the custom battery is Lithium or non-lithium.
Sets the maximum charging voltage for custom lithium batteries.
Sets the voltage for resuming charging after battery discharge.
Sets the bulk charging voltage for custom non-lithium batteries.
Sets the floating charging voltage for custom batteries.
Explains the meaning of the AC/INV, CHG, and FAULT LED indicators.
Describes the function and use of the control panel keys for operation.
Details the icons and their meanings on the inverter's LCD display.
Indicates the AC input status and related voltage, frequency, and current readings.
Shows program selection, warning, and fault codes on the LCD display.
Displays output voltage, frequency, load percentage, VA, and Watt.
Shows battery level, charging status, and voltage modes in AC and battery modes.
Indicates overload status and load percentage based on battery voltage.
Explains icons for shore power, utility power, charger circuit, and inverter circuit.
Indicates when the unit alarm is disabled.
Describes the function and use of the control panel keys for programming.
Allows exiting the parameter setting mode and returning to the main menu.
Configures the power source priority between utility and battery.
Sets the acceptable AC input voltage range for utility or generator operation.
Enables or disables the power saving mode to conserve battery power.
Controls whether the inverter automatically restarts after a temperature fault.
Sets the output frequency for the inverter's AC power.
Sets the maximum utility charging current for the battery bank.
Sets the voltage point to disconnect loads when the battery is low.
Sets the voltage for resuming operation after over-voltage conditions.
Configures alarm settings for faults and button presses.
Configures the inverter display to return to default or stay on the last screen.
Controls whether the LCD screen turns off after inactivity.
Disables audible feedback for a quieter operation.
Enables or disables the recording of fault codes.
Sets the bulk charging voltage for custom batteries.
Sets the floating charging voltage for custom batteries.
Sets the minimum DC voltage before the inverter cuts off operation.
Sets the AC input frequency range for utility or generator.
Allows custom selection of battery type for charging parameters.
Sets the high voltage trip for dry contacts to control generator start/stop.
Sets the low voltage trip for dry contacts to control generator start/stop.
Enables or disables dry contact control for the auto generator function.
Sets a programmable battery voltage alarm to warn of discharge.
Customizes the AC output voltage for specific device requirements.
Describes the initial constant current charging phase.
Details the absorption charge phase with constant voltage.
Explains the trickle charging phase to maintain battery charge.
Describes the high-voltage charging stage for specific battery types.
Details warning events and their corresponding codes and icons.
Lists fault events, their codes, and associated error displays.
Lists key performance parameters for the inverter function.
Lists key performance parameters for the battery charger function.
Details specifications related to the automatic transfer switch functionality.
Lists general operating and environmental specifications for the unit.
Specifications for the wired remote control accessory.
General| Continuous Power | 2000W |
|---|---|
| Surge Power | 4000W |
| Input Voltage | 12V DC |
| Output Voltage | 120V AC |
| Output Waveform | Pure Sine Wave |
| Output Frequency | 60Hz |
| THD | <3% |
| Operating Temperature Range | -4°F to 104°F (-20°C to 40°C) |
| Protection | Overload, Over Temperature, Short Circuit |
| Efficiency | 90% |
| USB Port | 5V/2.1A |
| Under Voltage Protection | 10V DC |
To Next Page
