Renogy Adventurer User Manual

04
General Information
4 Stage PWM charging: Bulk, Boost. Float, and Equalization.
Protection against: overcharging, over current, short-circuit, and reverse polarity.
Unique USB port on the front display.
Integrated communication port for remote monitoring
Charges over-discharged lithium iron-phosphate batteries
Remote temperature compensation compatible.
Remote battery voltage sensor compatible.
The Adventurer is an advanced charge controller for off-grid solar applications. Integrating
highly efficient PWM charging, this controller increases battery life and improved system
performance. It can be used for 12V or 24V battery or battery bank. The controller is
embedded with self-diagnostics and electronic protection functions that prevent damages
from installation mistakes or system faults.
Automatic recognition for 12V or 24V system voltage.
Backlit LCD screen for displaying system operating information and data.
30A charging capacity.
Compatible with AGM, Sealed, Gel, Flooded, and Lithium batteries.
Temperature compensation and correcting the charging and discharging parameters
automatically, improving battery lifetime.
Specifically designed for RV application and allows for aesthetically clean flush
mounting on walls.
Key Features
EN

Renogy Adventurer Specifications

General

Rated Charge Current	30A
System Voltage	12V/24V Auto
Max PV Input Voltage	50V
Max Output Current	30A
Sealing	IP20
Display	LCD
Type	PWM Solar Charge Controller
Self-Consumption	<10mA
Operating Temperature	-35°C to +45°C
Max Input Power	400W (12V), 800W (24V)
Battery Type	Sealed, Gel, Flooded, and Lithium
Protections	Overload, Short-circuit
Communication	RS232