These components are not included and require a separate purchase.
Screws included for the attachment
Screws are included for flush mounting.
Included Components
Optional Components
This sensor measures the temperature at the battery and uses this
data for very accurate temperature compensation. Accurate
temperature compensation is important in ensuring proper battery
charging regardless of the temperature.
NOTE
Do Not use this sensor when charging lithium battery.
Remote Temperature Sensor:
The battery voltage sensor is polarity sensitive and should be used if
the adventurer will be installed with longer line runs. In longer runs, due
to connection and cable resistance, there can be discrepancies in the
voltages at the battery terminals. The BVS will make sure the voltage is
always correct to ensure the most efficient charging.
Battery Voltage Sensor (BVS):
The BT-1 Bluetooth module is a great addition to any Renogy charge
controllers with a RS232 port and is used to pair charge controllers
with the Renogy BT App. After pairing is done you can monitor your
system and change parameters directly from you cell phone or tablet.
No more wondering how your system is performing, now you can see
performance in real time without the need of checking on the
controller’s LCD.
Renogy BT-1 Bluetooth Module:
The DM-1 4G Module is capable of connecting to select Renogy
charge controllers through an RS232, and is used to pair charge
controllers with Renogy 4G monitoring app. This app allows you to
conveniently monitor your system and charge syeters parameters
remotely from anywhere 4G LTE network service is available.
Renogy DM-1 4G Data Module:
07
EN
The Renogy Adventurer Surface Mount will give you the option to
mount the charge controller to any flat surface; circumventing the flush
mount option.
Adventurer Surface Mount Attachment
NOTE
To Next Page
Loading...
Need help?
General
