Renogy MT-1 - Advanced Settings and System Status; Backlight and Time Configuration

7
The icon will be displayed when the user is in the SET function. It will disappear once the
user is in the reading menu.
Function
Display
Description
Temperature dEg Changes Temperature Units
(C°)
to (F°)
Backlight B: Sets a backlight timer after last button push
On: Always on
B:30 – 30 seconds B:20 – 20 seconds
B:10 – 10 seconds B:05 – 5 seconds
Off
: - Always off
Brightness Full:
Full:
high brightness
Half
: low brightness