Renogy ONE M1 - Operation; Wi-Fi Configuration; Binding to DC Home App

34
Operation
Operation
Wi-Fi Binding Add Devices/Smart Accesories
Wi-Fi
On the home page of Renogy ONE, go to Settings > System > Network > WLAN.
NOT
E
z
Renogy ONE supports 2.4 GHz Wi-Fi only.
Binding
If you did not follow the system wizard to bind Renogy ONE to the DC Home app, please follow
the steps below.
Method 1: Go to Settings > System > Bind, and then scan the QR code to bind Renogy ONE
to the DC Home app.
Method 2: Tap on the main interface and follow the system wizard to bind Renogy ONE to the
DC Home app.
Method 3: On the main interface of DC Home app, tap + and choose Add Renogy ONE, and
then follow the system wizard to bind Renogy ONE.
With the binding complete, you can view the data of Renogy ONE, control the device, and set
smart scenarios through the DC Home app.
CAUTIO
N
z
Ensure both Renogy ONE and your phone where the DC Home app runs are connected to
the Internet.
Add Devices/Smart Accesories
How to add devices to Renogy ONE varies depending on the communication connection type.
z
For wired communication (RV-C/RS485), the device is automatically recognized by and
added to Renogy ONE.
z
For wireless communication (Bluetooth/Zigbee), tap Settings and choose Add Devices on
Renogy ONE.
z
If you have bound Renogy ONE to the DC Home app, you can add devices and smart
accessories through the DC Home app. On the Renogy ONE interface, tap + and choose
Add Devices to add devices or smart accessories.
Renogy ONE is compatible with all R
enogy’
s energy devices and smart accessories with
communication functions (RV-C, RS485, Bluetooth, Zigbee).
CAUTIO
N
z
For adding Renogy energy devices via Bluetooth, make sure the device Bluetooth is turned
on.