Rentech HYD 3000-EP - PV Connection

To Next Page

To Previous Page

HYD 3K~6K-EPUser manual

- 27 -

Note：

：

L2 is 2 to 3mm longer than L1①

1.Screw

2.OT Terminal

3.Tapped hole

4.3. PV Connection

Procedure:

Step 1

Select the appropriate cable type and specifications according to the

table4-

3.Remove cable glands from the positive and negative connectors.( It is

recommended that the positive and n

egative be distinguished by different colors).

②

③

Select the appropriate cable type and specifications according to the

3.Remove cable glands from the positive and negative connectors.( It is

egative be distinguished by different colors).

Related product manuals