Reolink Argus 3 User Manual

Reolink Wireless Battery-powered Camera
91
Remove the Micro SD card (example: Argus 3)
1. Please switch off the camera before removing the SD card.
2. Find the micro SD card slot and please use something sharp such as the reset
pin or a paperclip or your fingernail to push the SD to make it pop out.
Note:
For other models, the steps to install or remove the SD card are similar. Please refer
to the part of Device Overview in Chapter 1 to find the SD card slot.

Reolink Argus 3 Specifications

General

Field of View	120°
Audio	Two-Way Audio
Weatherproof	IP65
Wireless Standard	IEEE 802.11b/g/n
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Dimensions	121 x 90 x 56 mm
Resolution	2K (4MP)
Power Source	Rechargeable battery or solar panel
Connectivity	Wi-Fi (2.4GHz)
Image Sensor	CMOS Sensor
Video Resolution	2560 x 1440
Infrared Night Vision	Up to 10 meters (33ft) (IR LED)
Color Night Vision	Yes
PIR Detection Distance	Up to 10 meters
PIR Detection Angle	100°
Wireless Security	WPA-PSK/WPA2-PSK
Battery	5200mAh Rechargeable Battery
Power	Solar panel compatible
Local Storage	microSD card (up to 128GB)
Storage	Micro SD card
Motion Detection	PIR motion detection
Weight	330g
Lens	Fixed Lens, f=2.8mm