REPLIGEN XCell ATF10 User Manual

XCell
TM
ATF System with C410:V4B Controller User Guide
47
Button
Description
P5 PV
Selector switch: Display or Hide Input value on Main screen
Scale PV
Selector switch: Display or Hide Input value on Main screen
PSI or BAR
buttons
Only visible in local mode, when XCell™ ATF pump is stopped and no
calibration activities are enabled. Select one to display alternate
engineering units.
OPC Inputs
Displays user defined OPC input parameters, addresses and values
OPC Outputs
Displays pop-up screen of OPC output parameters, addresses and values
Input Page 0-4
Displays user defined Profibus inputs by page of parameters, addresses,
values and feedback values
Output Page 0-5
Displays Profibus outputs by page of parameters, addresses and values
Calibration
Displays calibration settings in the PLC.
Users
Navigate to the Users Screen
All Primary
All Primary Screen Buttons are displayed to navigate to those screens
Close Application
Exits the HMI program; allow access to Windows CE settings screen.

REPLIGEN XCell ATF10 Specifications

General

Brand	REPLIGEN
Model	XCell ATF10
Category	Laboratory Equipment
Language	English