13
CLINICAL MENUS
CLINICIAN’S
OPTIONS MENU
SMART DATA
This function allows the clinician to turn on or off the patient’s access to information
on Mask Fit, Average Pressure and Usage. The enabled parameters will appear in the
patient’s Results menu. Additionally, if the AUTO APPEAR option is set to ’On’, the
enabled screens will be displayed automatically on the LCD for 30 minutes after the
session is completed.
NOTE AVG PRESS displays the same value in the Smart Data and Efficacy Data menus.
FACTORY DEFAULTS
To return settings to their defaults, press the Left key (’reset’) on the FACTORY
DEFAULTS screen. A message will ask you to confirm the command. To continue,
press the Left key again. A confirmation message is displayed for 3 seconds, then you
are returned to the Clinical menu standby screen. The settings will then be configured
as shown in the table “Factory Default settings” on page 16. As units are customised
according to region, these settings will override those initially received.
enter exit
SETTINGS
LEAK: 0.40L/s
enter exit
FACTORY DEFAULTS
SMART DATA
ERASE DATA?
USAGE:ON
AUTO APPEAR:ON
BACKLIGHT:AUTO
DATE:20JAN2002
MASK FIT:ON
change exit
AVG PRESS:ON
reset exit
change exit
change exit
change exit
change exit
change exit
change exit
change exit
TIME:16:54hrs
LANGUAGE:ENGLISH
enter exit
enter exit
OPTIONS
enter exit
enter exit
ALARMS
SERVICING
RESULTS
yes exit
ADVANCED
enter exit
26853r2clin.book Page 13 Wednesday, October 14, 2015 4:03 PM
To Next Page
Loading...
Need help?
General
