Resol DeltaSol BS/3 User Manual

D e lt a S o l
®
BS/3
© RESOL 10082_deltasol_bs/3.monus.indd
| 30
6. Accessories
Overvoltage protection device
In order to avoid overvoltage damage at collector sensors (e.g. caused by local lightning
storms), we recommend the overvoltage protection RESOL SP10.
RESOL SP10 Article no.: 180 110 70
Sensors
Our product range includes high-precision platinum temperature sensors, flatscrew sensors,
outdoor temperature sensors, indoor temperature sensors, cylindrical clip-on sensors, also
as complete sensors with immersion sleeve.
For more information, see our catalogue and price list.
Smart Display SD3
The RESOL Smart Display is designed for simple connection to RESOL controllers with
RESOL VBus
®
. It is used for visualizing data issued by the controller: collector temperature,
storage temperature and energy yield of the solar thermal system. The use of high-efficient
LEDs and filter glass assures a high optical brilliance and good readability even in poor visi-
bility conditions and from a larger distance. An additional power supply is not required.
RESOL SD3 (unit °C) Article no.: 180 004 90
RESOL SD3 (unit °F) Article no.: 180 007 77
Large Display GA3
The RESOL Large Display GA3 is designed for simple connection to RESOL controllers via
the RESOL VBus
®
. It is used for visualizing the data issued by the controller: collector and
store temperature as well as heat quantity produced in the solar system.
The use of high-efficient LEDs and antireflective filter glass assures a high optical brilliance
and good readability - even in poor lighting conditions and at a larger distance.
RESOL GA3 (unit °C) Article no.: 180 006 50
RESOL GA3 (unit °F) Article no.: 180 007 87

Resol DeltaSol BS/3 Specifications

General

Brand	Resol
Model	DeltaSol BS/3
Category	Controller
Language	English