en
44
Installation Indications, functions and options MessagesCommissioningOperation and function
Indication of thermal disinfection
TDIS
Disinfection temperature
Display range: -40 … +260 °C
If the thermal disinfection option (OTDIS) is activated and the disinfection
period is in progress, the disinfection temperature measured at the reference
sensor is displayed in this channel.
CDIS
Countdown monitoring period
Display range: 0 … 30:0 … 24 (dd:hh)
If the thermal disinfection option (OTDIS) is activated and the monitoring
period is in progress, the remaining time of the monitoring period is displayed
as CDIS (in days and hours), counting backwards.
SDIS
Starting time
Display range: 0:00 … 24:00 (time)
If the thermal disinfection option (OTDIS) is activated and a starting delay
time has been adjusted, the delay time is displayed ( ashing) in this channel.
DDIS
Disinfection period
Display range: 0:00 … 23:59 (hh:mm)
If the thermal disinfection option (OTDIS) is activated and the disinfection
period is in progress, the remaining time of the heating period is displayed (in
hours and minutes) in this channel, counting backwards.
Display of time
Time
Time
Indicates the current clock time.
To Next Page
Loading...
Need help?
General
